These Are the Top 4 Hazards in Construction
Observe National Safety Month with These Tips
We all know that the construction industry is one of the most hazardous in the United States, and many of the injuries that occur on construction sites are caused by these top four hazards: falls, struck-by, caught-in-between and electrocutions.
When you have sufficient knowledge, preventing accidents caused by these hazards is easier than you might think. In honor of June being National Safety Month, here are some basic safety tips to share with your workers to keep them injury-free.
- Wear and use fall arrest equipment.
- Install and maintain perimeter protection.
- Cover and secure all floor openings and label floor opening covers.
- Use ladders and scaffolds safely.
- Never position yourself between moving and fixed objects.
- Wear high-visibility clothing near equipment and vehicles so that others can see you clearly.
Preventing Caught-in-between Hazards
- Never enter an unprotected trench or excavation that is five feet or deeper without an adequate protective system in place. Some trenches that are less than five feet may need a similar system as well.
- Make sure that a trench or excavation is protected either by sloping, shoring, benching or a trench shield system.
- Locate and identify utilities before starting work for the day.
- Look for overhead power lines when operating any equipment.
- Maintain a safe distance away from power lines and learn your area’s distance requirements.
- Don't operate portable electric tools unless they are grounded or double insulated.
- Use ground-fault circuit interrupters for protection.
- Be alert to electrical hazards when working with ladders, scaffolds or other platforms.
- Calculating and Communicating Your Safety ROI
- Learning from the Manhattan Incident: Crane Safety
- Learning from the Houston Incident: Scaffolding Checklist
- Road Crew Flagger Safety
ABOUT THE AUTHOR